Ester-Enhanced Fully Synthetic Mid-SAPS European Engine Oil
| 製品名 | KATMOTO K8 SPORT | SAEグレード | 0W-40 |
| 製品タイプ | Ester-Enhanced Fully Synthetic Engine Oil | パフォーマンス・レベル | API SQ / SP; ACEA C3-23 |
| シリーズ・ポジショニング | K8 – Sport & European Performance | 申し込み | 欧州車 / GPFおよびDPFシステム |
KATMOTO K8 SPORT 0W-40 is an ester-enhanced fully synthetic Mid-SAPS engine oil engineered for high-performance European gasoline and light-duty diesel vehicles requiring SAE 0W-40 and ACEA C3 high-HTHS performance. Its advanced formulation combines rapid lubrication in severe cold with robust oil-film strength at sustained high temperature and controlled sulfated ash, phosphorus and sulfur. It helps protect turbocharged direct-injection engines while supporting the durability and efficiency of GPF, DPF, TWC and SCR after-treatment systems under demanding urban, motorway and all-season operation.
| ACEA C3 高いHTHS保護性能 Maintains a durable oil film with HTHS viscosity above 3.5 mPa·s for demanding European engines. |
Mid-SAPSとの後処理互換性 Controlled ash, phosphorus and sulfur help protect GPF, DPF, TWC and SCR systems. |
| API SQ turbo and LSPI protection Supports wear, oxidation, deposit and LSPI control in modern turbocharged direct-injection gasoline engines. |
Wide-temperature 0W-40 performance Delivers rapid cold-start lubrication and strong high-temperature oil-film strength. |
| Clean engine and oxidation control Helps resist sludge, varnish, piston deposits and viscosity increase under severe operating conditions. |
欧州のOEM向け性能 Designed for relevant Mercedes-Benz, Volkswagen/Audi, Porsche, Opel/GM and Fiat performance requirements. |
| アプリケーション | High-performance European gasoline and light-duty diesel passenger cars, SUVs and light vans, including turbocharged direct-injection and GPF/DPF-equipped models, where SAE 0W-40 and ACEA C3 engine oil are specified. |
| 対象 | API SQ / SP; ACEA C3-23; MB 229.31 / 229.51 / 229.52; VW 511 00; Porsche C40; GM dexos2; Fiat 9.55535-S2-type applications. |
| 重要なお知らせ | Use only where the vehicle manufacturer specifies SAE 0W-40 and a matching performance level. Performance suitability does not constitute an official OEM approval unless supported by a current approval license or certificate. Follow the vehicle manufacturer’s drain interval. |
| プロパティ | 試験方法 | 目標 標準値 |
| 外観／色 | 目視 | 透明な琥珀色の液体 |
| SAE粘度グレード | SAE J300 | 0W-40 |
| 密度 @ 15°C | ASTM D4052 | 0.846 g/cm³ |
| 動粘度 @ 40°C | ASTM D445 | 72.0 mm²/s |
| 動粘度 @ 100°C | ASTM D445 | 13.9 mm²/s |
| 粘度指数 | ASTM D2270 | 198 |
| CCS粘度 @ -35°C | ASTM D5293 | 5,900 mPa・s |
| MRV 粘度 @ -40°C | ASTM D4684 | 19,000 mPa·s |
| HTHS 150℃における粘度 | D4683 / D4741 | 3.80 mPa·s |
| 注ぎ口 | ASTM D97 | -51°C |
| 引火点、COC | ASTM D92 | 230°C |
| ノアック蒸発損失 | ASTM D5800 | 8.8 %の質量 |
| トータル・ベース・ナンバー（TBN） | ASTM D2896 | 8.3 mg KOH/g |
| 硫酸灰 | ASTM D874 | 0.78 %の質量 |
| リン | ASTM D5185 | 0.080 %の質量 |
| Sulfur | ASTM D5185 | 0.25 % mass |
