Ester-Enhanced Fully Synthetic Mid-SAPS European Engine Oil
| Название продукта | KATMOTO K8 SPORT | Класс SAE | 0W-40 |
| Тип продукта | Ester-Enhanced Fully Synthetic Engine Oil | Уровень производительности | API SQ / SP; ACEA C3-23 |
| Позиционирование серии | K8 – Sport & European Performance | Заявка | Европейские автомобили / Системы GPF и DPF |
KATMOTO K8 SPORT 0W-40 is an ester-enhanced fully synthetic Mid-SAPS engine oil engineered for high-performance European gasoline and light-duty diesel vehicles requiring SAE 0W-40 and ACEA C3 high-HTHS performance. Its advanced formulation combines rapid lubrication in severe cold with robust oil-film strength at sustained high temperature and controlled sulfated ash, phosphorus and sulfur. It helps protect turbocharged direct-injection engines while supporting the durability and efficiency of GPF, DPF, TWC and SCR after-treatment systems under demanding urban, motorway and all-season operation.
| ACEA C3 — высокая защита от HTHS Maintains a durable oil film with HTHS viscosity above 3.5 mPa·s for demanding European engines. |
Совместимость с системой доочистки Mid-SAPS Controlled ash, phosphorus and sulfur help protect GPF, DPF, TWC and SCR systems. |
| API SQ turbo and LSPI protection Supports wear, oxidation, deposit and LSPI control in modern turbocharged direct-injection gasoline engines. |
Wide-temperature 0W-40 performance Delivers rapid cold-start lubrication and strong high-temperature oil-film strength. |
| Clean engine and oxidation control Helps resist sludge, varnish, piston deposits and viscosity increase under severe operating conditions. |
Производительность, ориентированная на европейских производителей оригинального оборудования Designed for relevant Mercedes-Benz, Volkswagen/Audi, Porsche, Opel/GM and Fiat performance requirements. |
| Приложения | High-performance European gasoline and light-duty diesel passenger cars, SUVs and light vans, including turbocharged direct-injection and GPF/DPF-equipped models, where SAE 0W-40 and ACEA C3 engine oil are specified. |
| Подходит для | API SQ / SP; ACEA C3-23; MB 229.31 / 229.51 / 229.52; VW 511 00; Porsche C40; GM dexos2; Fiat 9.55535-S2-type applications. |
| Важное уведомление | Use only where the vehicle manufacturer specifies SAE 0W-40 and a matching performance level. Performance suitability does not constitute an official OEM approval unless supported by a current approval license or certificate. Follow the vehicle manufacturer’s drain interval. |
| Недвижимость | Метод испытания | Целевое значение Типичное значение |
| Внешний вид / Цвет | Визуальный | Прозрачная жидкость янтарного цвета |
| Класс вязкости по стандарту SAE | SAE J300 | 0W-40 |
| Плотность при 15 °C | ASTM D4052 | 0,846 г/см³ |
| Кинематическая вязкость при 40 °C | ASTM D445 | 72.0 mm²/s |
| Кинематическая вязкость при 100 °C | ASTM D445 | 13.9 mm²/s |
| Индекс вязкости | ASTM D2270 | 198 |
| Вязкость по методу CCS при -35 °C | ASTM D5293 | 5 900 мПа·с |
| Вязкость MRV при -40 °C | ASTM D4684 | 19,000 mPa·s |
| Вязкость HTHS при 150 °C | ASTM D4683 / D4741 | 3.80 mPa·s |
| Температура застывания | ASTM D97 | -51 °C |
| Flash Point, COC | ASTM D92 | 230 °C |
| Потери при испарении по методу Ноака | ASTM D5800 | 8,8 % масса |
| Общее щелочное число (TBN) | ASTM D2896 | 8.3 mg KOH/g |
| Сульфатированная зола | ASTM D874 | 0,78 Масса % |
| Фосфор | ASTM D5185 | 0,080 % масса |
| Sulfur | ASTM D5185 | 0.25 % mass |
