Base Oils & Additives | PAO, Ester & GTL | KATMOTO

Additive Package SQ / GF-7A

admin — Mon, 22 Jun 2026 05:19:56 +0000

Product Description

KATMOTO Additive Package SQ / GF-7A is a balanced detergent-inhibitor (DI) additive package for blending passenger-car gasoline engine oils targeting API SP→SQ and ILSAC GF-7A performance when combined with suitable base oils and a viscosity modifier at the recommended treat rate. It provides detergency, dispersancy, anti-wear, antioxidant, LSPI-mitigation and corrosion-protection chemistry in a single concentrate for efficient, consistent finished-oil production.

Key Performance Features

Complete DI chemistry

detergents, dispersants, antioxidants, anti-wear and inhibitors in one package.

API SP→SQ / GF-7A target

formulated to reach modern gasoline-oil performance at recommended treat rate.

LSPI mitigation

calcium/magnesium balance supports low-speed pre-ignition control.

Engine cleanliness

strong detergency and dispersancy for piston and sludge control.

Wear & corrosion protection

anti-wear and corrosion inhibitors protect engine components.

Consistent blending

single-concentrate dosing simplifies finished-oil production.

Applications & Performance Level

Applications	Blending passenger-car gasoline engine oils (0W/5W/10W multigrades) targeting API SP→SQ and ILSAC GF-7A performance, combined with suitable Group III/IV/V base oils and a viscosity modifier at the recommended treat rate.
Specification	API SP → SQ (target) — formulated toward current/next gasoline service categories. ILSAC GF-7A (target) — fuel-economy passenger-car oil performance target. LSPI protection — Ca/Mg balance for low-speed pre-ignition mitigation. Chain-wear & timing protection — supports modern engine timing-system durability. Recommended treat rate — blend per the specified percentage with base oil + VM.
OEM Suitability	Lubricant blenders producing passenger-car gasoline engine oils. Blend at the recommended treat rate with suitable base oils and viscosity modifier; validate the finished oil against the target specification before claiming any API/ILSAC performance.
Important Notice	This is an additive concentrate, not a finished lubricant. Final API/ILSAC performance depends on the complete formulation and must be validated by engine testing. Treat rate and base-oil selection are the blender’s responsibility.

投稿 Additive Package SQ / GF-7A は Nippon Synthetic Chemical Co., Ltd. に最初に表示されました。

Polyol Ester (POE)

admin — Mon, 22 Jun 2026 05:19:55 +0000

Product Description

Polyol Ester (POE) is a polyol-ester (poe) group v synthetic base oil. It offers a high viscosity index, low volatility and excellent oxidation and thermal stability as a premium base stock for blending high-performance engine oils, driveline fluids and industrial lubricants. Typical physical properties are listed below for formulation reference.

Key Performance Features

Outstanding thermal stability

ester chemistry withstands very high temperatures with low deposits.

High solvency / detergency

polar esters keep engines clean and solubilise additives and deposits.

Low volatility & high flash

very low evaporation and high flash point for high-temperature use.

Excellent lubricity

strong boundary lubricity and film strength.

Seal-conditioning & biodegradable

conditions seals and offers good biodegradability.

Performance co-base stock

blends with PAO/GTL to boost solvency and thermal performance.

Applications & Performance Level

Applications	Blending of high-performance synthetic and semi-synthetic engine oils, transmission and gear fluids, greases and industrial lubricants requiring a Group V (POE ester) base stock.
Specification	API Group V Base Oil (Ester) — base-oil group classification for this stock. High viscosity index — high VI for multigrade and wide-temperature formulations. Low volatility (Noack) — low evaporation loss for low oil consumption. Oxidation & thermal stability — stable base for long-life finished lubricants. Blending compatibility — compatible with additive systems and co-base stocks.
OEM Suitability	Lubricant formulators blending synthetic and semi-synthetic finished lubricants. Validate the finished-oil formulation and performance before production.
Important Notice	This is a blending feedstock for formulators, not a finished lubricant. Confirm suitability and treat rates for the target formulation. ”Suitable for” does not imply a finished-oil approval.

投稿 Polyol Ester (POE) は Nippon Synthetic Chemical Co., Ltd. に最初に表示されました。

PAO 6

admin — Mon, 22 Jun 2026 05:19:54 +0000

Product Description

Polyalphaolefin (PAO) API Group IV Synthetic Base Oil, 6 cSt. KATMOTO PAO 6 is a 6 cSt polyalphaolefin (PAO) API Group IV synthetic base oil for full-synthetic engine oils, gear oils, compressor oils and greases.

Key Performance Features

Excellent low-temperature fluidity

very low pour point (-60°C) for outstanding cold-flow.

High oxidation stability

fully synthetic PAO chemistry resists oxidation and deposits.

High viscosity index

high VI for stable viscosity across wide temperatures.

Low volatility

low Noack volatility for reduced oil consumption.

Sulfur/nitrogen-free

clean Group IV stock for low-SAPS and high-performance oils.

Higher-viscosity grade

6 cSt grade for engine, gear and compressor synthetic blends.

Applications & Performance Level

Applications	Blending of full-synthetic engine oils, gear oils, compressor oils and greases requiring a 6 cSt Group IV PAO base stock with high VI and excellent low-temperature and oxidation performance.
Specification	API Group IV (PAO) — fully synthetic polyalphaolefin base stock. Excellent low-temp fluidity — very low pour point for severe cold service. High VI / low Noack — stable viscosity and low volatility. Sulfur/nitrogen-free — for premium low-SAPS formulations. Full-synthetic blending — for engine, gear and compressor oils.
OEM Suitability	Supplied as a blending base stock for lubricant formulators. Typical for full-synthetic engine oils, synthetic gear and compressor oils.
Important Notice	These are raw blending stocks supplied to formulators. Typical values are for guidance; confirm against the certificate of analysis (COA) for each batch.

投稿 PAO 6 は Nippon Synthetic Chemical Co., Ltd. に最初に表示されました。

GTL Base Oil 6#

admin — Mon, 22 Jun 2026 05:19:53 +0000

Product Description

GTL Base Oil 6# is a gas-to-liquid (gtl) group iii+ base oil, ~6 cst. It offers a high viscosity index, low volatility and excellent oxidation and thermal stability as a premium base stock for blending high-performance engine oils, driveline fluids and industrial lubricants. Typical physical properties are listed below for formulation reference.

Key Performance Features

Very high viscosity index

GTL chemistry delivers a high VI for excellent multigrade performance.

Low Noack volatility

very low evaporation loss for low oil consumption.

Water-white purity

near-zero sulphur and aromatics for clean, stable finished oils.

Excellent oxidation stability

stable base for long-drain engine and industrial oils.

Higher-viscosity GTL

adds film strength to mid- and high-viscosity formulations.

Broad blending use

ideal for engine oils, gear and industrial lubricants.

Applications & Performance Level

Applications	Blending of high-performance synthetic and semi-synthetic engine oils, transmission and gear fluids, greases and industrial lubricants requiring a Group III+ (GTL) base stock.
Specification	API Group III+ Base Oil — base-oil group classification for this stock. High viscosity index — high VI for multigrade and wide-temperature formulations. Low volatility (Noack) — low evaporation loss for low oil consumption. Oxidation & thermal stability — stable base for long-life finished lubricants. Blending compatibility — compatible with additive systems and co-base stocks.
OEM Suitability	Lubricant formulators blending synthetic and semi-synthetic finished lubricants. Validate the finished-oil formulation and performance before production.
Important Notice	This is a blending feedstock for formulators, not a finished lubricant. Confirm suitability and treat rates for the target formulation. ”Suitable for” does not imply a finished-oil approval.

投稿 GTL Base Oil 6# は Nippon Synthetic Chemical Co., Ltd. に最初に表示されました。

PAO 4

admin — Mon, 22 Jun 2026 05:19:53 +0000

Product Description

Polyalphaolefin (PAO) API Group IV Synthetic Base Oil, 4 cSt. KATMOTO PAO 4 is a 4 cSt polyalphaolefin (PAO) API Group IV synthetic base oil for top-tier full-synthetic engine oils, greases and specialty lubricants.

Key Performance Features

Exceptional low-temperature fluidity

very low pour point (-66°C) for outstanding cold-flow.

High oxidation stability

fully synthetic PAO chemistry resists oxidation and deposits.

Wide-temperature performance

stable viscosity across extreme hot and cold temperatures.

Sulfur/nitrogen-free

clean Group IV stock for low-SAPS and high-performance oils.

Low volatility

controlled Noack volatility for reduced oil consumption.

Premium synthetic base

reference base stock for top-tier full-synthetic lubricants.

Applications & Performance Level

Applications	Blending of full-synthetic engine oils, synthetic greases, gear oils, compressor oils and specialty lubricants requiring a Group IV PAO base stock with excellent low-temperature and oxidation performance.
Specification	API Group IV (PAO) — fully synthetic polyalphaolefin base stock. Excellent low-temp fluidity — very low pour point for severe cold service. High oxidation stability — clean, saturated synthetic chemistry. Sulfur/nitrogen-free — for premium low-SAPS formulations. Full-synthetic blending — reference stock for top-tier lubricants.
OEM Suitability	Supplied as a blending base stock for lubricant formulators. Typical for full-synthetic 0W engine oils, synthetic greases and low-temperature lubricants.
Important Notice	These are raw blending stocks supplied to formulators. Typical values are for guidance; confirm against the certificate of analysis (COA) for each batch.

投稿 PAO 4 は Nippon Synthetic Chemical Co., Ltd. に最初に表示されました。

GTL Base Oil 4#

admin — Mon, 22 Jun 2026 05:19:52 +0000

Product Description

GTL Base Oil 4# is a gas-to-liquid (gtl) group iii+ base oil, ~4 cst. It offers a high viscosity index, low volatility and excellent oxidation and thermal stability as a premium base stock for blending high-performance engine oils, driveline fluids and industrial lubricants. Typical physical properties are listed below for formulation reference.

Key Performance Features

Very high viscosity index

GTL chemistry delivers a high VI for excellent multigrade performance.

Water-white purity

near-zero sulphur and aromatics for clean, stable finished oils.

Low Noack volatility

low evaporation loss supports low oil consumption.

Excellent oxidation stability

stable base for long-drain engine and industrial oils.

Group III+ performance

approaches synthetic (PAO) performance at lower cost.

Broad blending use

ideal for low-viscosity, fuel-economy engine oils.

Applications & Performance Level

Applications	Blending of high-performance synthetic and semi-synthetic engine oils, transmission and gear fluids, greases and industrial lubricants requiring a Group III+ (GTL) base stock.
Specification	API Group III+ Base Oil — base-oil group classification for this stock. High viscosity index — high VI for multigrade and wide-temperature formulations. Low volatility (Noack) — low evaporation loss for low oil consumption. Oxidation & thermal stability — stable base for long-life finished lubricants. Blending compatibility — compatible with additive systems and co-base stocks.
OEM Suitability	Lubricant formulators blending synthetic and semi-synthetic finished lubricants. Validate the finished-oil formulation and performance before production.
Important Notice	This is a blending feedstock for formulators, not a finished lubricant. Confirm suitability and treat rates for the target formulation. ”Suitable for” does not imply a finished-oil approval.

投稿 GTL Base Oil 4# は Nippon Synthetic Chemical Co., Ltd. に最初に表示されました。